Dinstar DAG3000-312S High-density Analog VoIP Gateway
The DAG3000 is a multi-functional analog gateway offering seamless connectivity between IP-based telephony networks and legacy telephones (POTS), fax machines and PBX systems. It adopts modularized hardware design that allows to expand FXS/FXO ports by adding boards according to user’s requirements. Each board has 8 FXS/FXO ports, and the gateway supports 128 FXS/FXO ports at maximum.
DAG3000 supports the standard SIP protocol and it's compatible with leading IMS/NGN platforms and SIP based IP telephony systems. Which is ideally suited for small and medium businesses, call centers and multilocation environments that need VoIP services.
Key Features
- High density gateway, up to 128 FXS/FXO
- Modularized design, easy to expand
- Support IPv4 and IPv6
- 5KM Maximum Cabling Length
- Multiple codecs: G.711A/U,G.723.1,G.729A/B, iLBC
- Fully compatible with leading IMS/NGN, SIP based IP telephony system
Dimensions
Weight
Technical Description
- Physical Interfaces
- Capacity
- Range from 8 to 128 FXO/FXS
- Support 16 user board slot
- User Board
- 2x RJ45 connectors with 8 FXO
- 2x RJ45 connectors with 8 FXS
- MCU Board
- 1x RS232, 115200bps
- 2x 10/100/1000Mbps, RJ45
- FXS
- Connector: RJ45 with 4 FXS
- Dial Mode: DTMF and Pulse
- Pulse: 10 and 20 PPS
- Caller ID: DTMF/FSK CLI Presentation
- Reversed Polarity
- Programmable Call Progress Tone
- Max Cable Length: 5 km
- Voice & FAX
- G.711A/U law, G.723.1, G.729A/B, G.726, AMR, iLBC
- Silence Suppression
- Comfort Noise Generation(CNG)
- Voice Activity Detection(VAD)
- Hook Flash
- Echo Cancellation(G.168), with up to 128ms
- Adaptive (Dynamic) Jitter Buffer
- Programmable Gain Control
- T.38/Pass-through
- High speed fax up to 14.4kbps
- Modem/POS
- DTMF mode: Signal/RFC2833/INBAND
- VLAN 802.1P/802.1Q
- Layer3 QoS and DiffServ
- FXO
- Connector: RJ45 with 4 FXO
- Dial Mode: DTMF/Pulse Dialing
- Caller ID: FSK, DTMF
- Polarity Reversal
- Answer Delay
- Busy Tone Detection
- No Current Detection
- VoIP
- Protocol
- SIP v2.0 (UDP/TCP),RFC3261
- SDP,RTP(RFC2833), RFC3262, 3263,3264,3265,2976,3311
- ETC (3GPP TS 24.629, RFC 3515, RFC 3891, RFC 3892)
- SIP over TLS
- RTP/RTCP, RFC2198, 1889
- RFC4028 Session Timer
- RFC3266 IPv6 in SDP
- RFC2806 TEL URI
- RFC3581 NAT, rport
- Primary/backup SIP server
- Outbound Proxy
- DNS SRV/ A Query/NATPR Query
- SIP Trunk
- Early Media/Early Answer
- NAT:STUN, Static/Dynamic NAT
- Supplement Service
- Call Waiting
- Blind Transfer
- Attend Transfer
- Call Forward on Busy
- Call Forward on No Reply
- Unconditional Call Forward
- Warm/Immediately Hotline
- Call Hold
- Do-not-disturb
- 3-Way Conference
- Message Waiting Indicator
- Speed Dial
- Maintenance
- SNMP v1/v2/v3
- TR069
- Auto Provisioning
- Web/Telnet
- Configuration Backup/Restore
- Firmware Upgrade via Web
- CDR
- Syslog(Emerg,alert, critical, error warning, notice, info, debug)
- Network Capture
- Ping/Tracert Test
- NTP/Daylight Saving Time
- IVR local Maintenance
- Outward Test(GR909)
- Cloud-based Management
- Software Features
- Hunting Group
- Web ACL
- Telnet ACL
- Action URL
- PPPoE/IPv4/IPv6
- Digitmap
- Routing Rules based Prefixes
- Caller/Called Number Manipulation
- OpenVPN
- Environmental
- Power Supply:
- 100-240VAC, 50-60 Hz
- Power Consumption: 105W MAX
- Temperature
- Operating Temperature: 0 °C ~ 45 °C
- Storage Temperature: -20 °C ~ 80 °C
- Humidity: 10% - 90% Non-Condensing
- Compliance: CE, FCC